Adjusting The Airflow Direction - Daikin FTKQ09XV2S Operation Manual

OPERATION

Adjusting the Airflow Direction

You can adjust the airflow direction to increase your comfort.
ATTENTION
[To operate automatically]
„ To adjust the flap (horizontal blade)
[To operate manually]
„ To adjust the louvres (vertical blades)
Knob
Hold the knob and move the louvres.
(You will find a knob on the left-side and the right-side blades.)
NOTE
„ Note on airflow direction setting
• The movable range of the flap varies according to
the operation mode, refer to the right picture�
12
• Always use a remote controller to adjust the angles of the flap.
- If you attempt to move it forcibly with hand when it is swinging, the
mechanism may be broken�
• Be careful when adjusting the louvres.
- Inside the air outlet, a fan is rotating at a high speed�
Up and down airflow direction
Press .
• " " appears on the LCD�
• The flap (horizontal blade) will begin to swing.
When the flap has reached the desired position,
press once more.
• The flap will stop moving.
• " " disappears from the LCD�
Right and left airflow direction
• When the unit is installed in the corner of a room, the direction of the louvres
should be facing away from the wall.
If they face the wall, the wall will block off the wind, causing the cooling
efficiency to drop.
[Movable range of the flap]
COOL / DRY
FAN