Set Up Fire Tv Stick Hardware - Amazon fire TV stick User Manual

Hide thumbs Also See for fire TV stick:

Table of Contents

Set Up Fire TV Stick Hardware

After you unpack your Fire TV Stick and remote, you will need to plug Fire TV Stick into your high-definition

TV and set up the remote.

Before you begin, locate the 2 AAA batteries (included) for the Amazon Fire TV Remote.

1. Plug the small end of the USB power cord into the Fire TV Stick device and the other end into the

power adapter. Then, plug the power adapter into a power source.

Note: It is recommended that you use the power adapter and plug it into a power outlet. Although some TVs have

USB ports, there may not be enough power for Fire TV Stick to work properly.

2. Plug the Fire TV Stick device into an HDMI port on your TV. Use the HDMI extender for an optimal fit, if

needed.

If your TV has more than one HDMI port, remember the number of the port into which you plugged your

Fire TV Stick.

3. Turn on your TV and select the applicable HDMI input.

4. Insert the 2 AAA batteries into the Amazon Fire TV Remote.

After you insert the batteries, the Amazon Fire TV Remote automatically becomes "discoverable" and

will automatically pair with your Fire TV Stick. If your remote isn't discovered, press the Home

button for at least five seconds, and then release it.

Figure 6:

Table of Contents