Install Additional Memory - Intel NUC 11 Pro Kit NUC11TNHi70Q User Manual

c.
3.2

Install Additional Memory

1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer.
3. Turn off the computer and disconnect the power cord.
4. Remove the computer's bottom chassis cover.
5. Install the additional module:
6. Reinstall and reconnect any parts you removed or disconnected to reach the
memory sockets.
7. Replace the computer's cover and reconnect the power cord.
NUC11TNHi30P, NUC11TNHi50W, NUC11TNHi70Q
User Guide – January 2021
the socket (A).
When the module is inserted, push down on the outer edges of
the module until the retaining clips snap into place (B). Make sure
the clips are firmly in place (C).
a. Align the small space at the bottom edge of the memory module with the
key on the socket.
b. Insert the bottom edge of the module at a 45 degree angle into the
socket (A).
c. When the module is inserted, push down on the outer edges of
the module until the retaining clips snap into place (B). Make
sure the clips are firmly in place (C).
9