Intel NUC7i3BNH User Manual

Intel NUC7i3BNH User Manual

Nuc kit
Hide thumbs Also See for NUC7i3BNH:

Advertisement

Quick Links

Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide
Intel® NUC Kit NUC7i7BNH
Intel® NUC Kit NUC7i5BNH
Intel® NUC Kit NUC7i3BNH
User Guide
1

Advertisement

Table of Contents
loading

Summary of Contents for Intel NUC7i3BNH

  • Page 1 Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide Intel® NUC Kit NUC7i7BNH Intel® NUC Kit NUC7i5BNH Intel® NUC Kit NUC7i3BNH User Guide...
  • Page 2: Before You Begin

    ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Installation Precautions When you install and test the Intel NUC, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: Sharp pins on connectors •...
  • Page 3 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. Install an M.2 SSD Intel NUC Kits NUC7i7BNH, NUC7i5BNH, and NUC7i3BNH support 80mm and 42mm M.2 SSDs. For a list of tested M.2 SSDs, go to the Tested Peripherals page on the Support site.
  • Page 4: Installing And Removing Memory

    3. Insert the bottom edge of the M.2 card into the connector (B). 4. Secure the card to the standoff with the small silver screw (C). Installing and Removing Memory Intel NUC Kits NUC7i3BNH and NUC7i5BNH have two DDR4 SO-DIMM sockets. Memory requirements: 1.2V memory •...
  • Page 5 Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide 1866 MHz or 2133 MHz SO-DIMMs • Non-ECC • For a list of tested memory, go to the System Memory page on the Support site. Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket.
  • Page 6: Close The Chassis

    4. Set the drive bay bracket down inside the chassis (B). Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws.
  • Page 7 1. Attach the VESA bracket to the back of the monitor or TV, using the four small black screws that were included in the box. 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC.
  • Page 8: Connect Power

    Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide 3. Slide the Intel NUC onto the VESA mount bracket. Connect Power Country-specific power plug attachments are included in the Intel NUC Kit box. 1. Choose the attachment for your region. Attachments in the box...
  • Page 9 Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide NUC7i7BNH NUC7i5BNH NUC7i3BNH ARG - Argentina CHN - China BRA - Brazil IND - India KOR – South Korea 2. Slide the attachment (B) onto the power plug, locking it into place (A).
  • Page 10: Install An Operating System

    Refer to Supported Operating Systems for a list of Intel-validated Windows* operating systems, as well as versions of Linux that have been reported as compatible by Intel NUC owners. Refer to Operating System Installation for system requirements and installation steps.

This manual is also suitable for:

Nuc7i5bnhNuc7i7bnhBoxnuc7i3bnh

Table of Contents