Preparation - Panasonic ES-LS9A-K820 Operating Instructions Manual

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the main body rear
terminals.
1
Insert the appliance plug
into the self-cleaning
recharger�
2
Remove the protective cap
while pressing the side of
the cap and insert the
shaver into the self-
cleaning recharger�
• Slowly insert the shaver into
the self‑cleaning recharger
taking care not to damage the
system outer foil.
3
Plug the adaptor into a household outlet�
• Check that the charge status lamp ( ) is glowing.
• Charging is completed after approx. 1 hour.
4
Disconnect the adaptor after charging is
completed�
Quick charge
Even though the battery runs out, you can shave
once after 3‑minute charge.
(This will differ depending on usage.)
12
The number of the battery
capacity lamp will increase
as charging progresses.
2
3
Notes
• When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
1
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the
charge status lamp ( ) will blink quickly and the
battery may fail to charge properly in extremely high
or low temperatures.
• The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave usage per day in
an ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
While charging
glows.
After charging is
completed
"100%" appears and then
turns off after 5 seconds.