Table of Contents
Advertisement
`17Y OLED(W7) Power Board Diagnostic method
1
▶ Disconnect the Main Board 24Pin Power Cable connector.
3
▶ Switch the LCD MODEL S/W to 20V by checking
the power voltage.
▶ Fix the LCD MODEL switch to 20V.(Smart JIG)
2
▶ Connect the 24Pin Power Cable connector
to the Muitl Gender JIG 28Pin connector
4
▶ When the OK LED(24V,12V) turns on, Power Board is normal.
▶ When the NG LED turns on, the Power Board
A21 (13/19)
can be judged as defective.
Copyright © 2019 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Advertisement
Table of Contents
