Technical Data; Warranty - Graco PRO AA4500 Instructions Manual

Gun Weight
. . . . . . . . . . . . . . . . . . . . . . . . . .
Gun Length . . . . . . . . . . . . . . . . . . . . .
Maximum Working Pressures
Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid . . . . . . . . . . . . . . . . . . . . . . .
Typical Noise Level at 40 psi (2.8 bar)*
Sound Pressure . . . . . . . . . . . . . . . . . . .
Sound Power . . . . . . . . . . . . . . . . . . . . .
Maximum Noise Level at 100 psi (7 bar)**
Sound Pressure . . . . . . . . . . . . . . . . . . .
Sound Power . . . . . . . . . . . . . . . . . . . . .
Voltage Output
. . . . . . . . . . . . . . . . . . . . . . . . . .
Short Circuit Current Output
Paint Resistivity Range
Air Inlet
. . . . . . . . . . . . . . . . . . . . .
Fluid Inlet
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted Parts . . . . . . . . .
Ultra High Molecular Weight Polyethylene,
Tungsten Carbide, Glass Filled Nylon
PTFE , Viton ,
Loctite is a registered trademark of the Loctite Corporation.
The Graco Warranty and Disclaimers

WARRANTY

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date
of sale by an authorized Graco distributor to the original purchaser for use. As purchaser's sole remedy for breach of this warranty,
Graco will, for a period of twelve months or two thousand hours of operation from time of sale, repair or replace any part of the equip-
ment proven defective. However, any deficiency in the barrel, handle, trigger, hook, internal power supply, and alternator (excluding
turbine bearings) will be repaired or replaced for thirty six months or six thousand hours of operation from time of sale. This warranty
applies only when the equipment is installed, operated and maintained in accordance with Graco's written recommendations.
This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installation, misap-
plication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco
component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment
will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material
or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
The terms of this warranty constitute purchaser's sole and exclusive remedy and are in lieu of any other warranties (express or im-
plied), including warranty of merchantability or warranty of fitness for a particular purpose, and of any non–contractual liabili-
ties, including product liabilities, based on negligence or strict liability. Every form of liability for direct, special or consequential dam-
ages or loss is expressly excluded and denied. in no case shall Graco's liability exceed the amount of the purchase price. Any action for
breach of warranty must be brought within two (2) years of the date of sale.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose, with re-
spect to accessories, equipment, materials, or components sold but not manufactured by Graco. These items sold, but not manufac-
tured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if any, of their manufacturer. Graco will provide
purchaser with reasonable assistance in making any claim for breach of these warranties.
Sales Offices: Atlanta, Chicago, Dallas, Detroit, Los Angeles, Mt. Arlington (N.J.)
Foreign Offices: Canada; England; Switzerland; France; Germany; Hong Kong; Japan; Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Technical Data

35 oz (1 kg)
11.4 in (290 mm)
100 psi (7 bar)
3000 psi (207 bar)
86 Db(A)
88.9 Db(A)
95 Db(A)
99.7 Db(A)
0–85 kV
. . . . . . . . . . . . . . 120 mA
. . . . 3 megohm-cm to infinity
1/4 npsm(m) left-hand
1/4 npsm(m)
Stainless Steel, Nylon, PEEK,
PRINTED IN U.S.A.
* Noise levels measured with a 40 psi (2.8 bar) air supply at
the gun air inlet and typical gun air flow settings.
** Noise levels measured with a 100 psi (7 bar) air supply at
the gun air inlet and maximum gun air flow settings.
Sound pressure was measured per Cagi Pneurop, 1969.
Sound power was measured per ISO–3744, 1981.
Radio Frequency Transmitter Approval
for Gun Part No. 236–031 and 236–033
FCC ID: JHI1
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.) This device may not cause harmful interference, and
2.) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modification to this equipment, not expressly
approved by the party responsible for compliance, could void
the user's authority to operate this equipment.
This equipment complies with (DOC) GRR
En conformite avec (MDC) RGR
308–294 4/93 Revised 12/94
6. (4)
6. (4).