LG CineBeam HU710PW-GL Owner's Manual page 63

Network Setting
Network Setting
If you configure settings for the network, you can use various services such as online
contents and applications.
Setting a Wired Network
1
Connect the LAN port of the projector and the router using a LAN cable.
The router should be connected to the Internet beforehand.
•
If the router supports DHCP, the projector is automatically connected to the
network when you connect the projector to the network with a LAN cable.
If the Network Is Not Automatically Connected
2
(Q. Settings) button on the remote control.
Press the
3
→ [General] → [Network] → [Wired Connection (Ethernet)].
Select
Setting a Wireless Network
1
Turn on the power of the router connected to the Internet.
2
(Q. Settings) button on the remote control.
Press the
3
→ [General] → [Network] → [Wi-Fi Connection].
Select
4
When the network search is complete, the list of networks available for
connection is shown.
5
Select a network to connect.
If your Wireless Router is password protected, enter the password configured
for the router.
7