LG CineBeam HU710PW-GL Owner's Manual page 123

[Digital Sound Output]
(Q. Settings) →
You can configure the [Digital Sound Output] settings.
•
You can set when
Wired Speaker] is set to [Optical Out Device]/[HDMI(ARC) Device].
• When [Pass Through] is enabled, sound effects may not be output.
•
The codec output with a device may differ from input signals.
[PCM] All
MPEG
Dolby Digital
[Auto]
Dolby Digital Plus /
/ [Pass
Atmos
Through]
Dolby TrueHD (HDMI
only)
HE-AAC
• Dolby TrueHD, HDMI eARC, Dolby Atmos: Some models may not be supported.
•
When connected with HDMI eARC, the output audio type will depend on the
audio type supported by the connected device.
• Depending on the connected device and the type of input audio, it may output as
Dolby MAT PCM (Dolby Metadata-Enhanced Audio Transmission PCM).
• When [Digital Sound Output] is set to [Pass Through] and the HDMI input is
Dolby TrueHD, Multi-Channel PCM, audio can be output as bypass.
→ [Sound] → [Advanced Settings] → [Digital Sound Output]
(Q. Settings) →
Sound Input
PCM
PCM
Dolby Digital
(Optical) Dolby Digital
(HDMI ARC) Dolby Digital Plus / Atmos
(Optical) Dolby Digital
(HDMI ARC) Dolby Digital Plus / Atmos
Dolby Digital
→ [Sound] → [Sound Out] → [Use
Digital Sound Output
67