Introduction; Evm Features; I/O Descriptions; Device Data Sheets - Texas Instruments bq242968 User Manual

Introduction

1 Introduction
1.1

EVM Features

For detailed features and operation, refer to
The bq24296M and bq24298 evaluation modules (EVM) are complete charger modules for evaluating an
2
I C-controlled single NVDC-1 charge using the bq24296M and bq24298 devices.
This EVM doesn't include the USB-to-GPIO interface board. To evaluate the EVM, a USB-to-GPIO
interface board must be ordered separately.
1.2

I/O Descriptions

Table 2 lists the jumper connections available on this EVM.
Jack
J1–VBUS
J1–GND
J2–PMID
J2–GND
J3–SYS
J3–GND
J4–BAT+
J4–GND
J6–INT
J6– OTG
J6–CE
J6–GND
J7
J8
J8
J9
J9
2 bq24296M and bq24298 EVM (PWR655) User's Guide
All manuals and user guides at all-guidesbox.com
Table 1
Table 1. Device Data Sheets
Device
bq24296M
bq24298
Table 2. EVM Connections
Description
Input: positive terminal
Input: negative terminal (ground terminal)
PMID pin connection/Power bank output
Ground/Power bank output negative terminal
Connected to system
Ground
Connected to battery pack
Ground
INT pin connection
OTG pin connection
CE pin connection
Ground
USB-to-GPIO connector (USB interface adapter connector – EV2300 or EV2400)
External TS1 pin connection
Ground
External TS2 pin connection
Ground
Copyright © 2014–2015, Texas Instruments Incorporated
for a list of devices and their data sheets.
Document
SLUSBU3
SLUSC59
SLUUB62A – August 2014 – Revised March 2015
www.ti.com
Submit Documentation Feedback