Using The Self-Timer - Casio QV-4000EX User Manual

Using the Self-timer

You can set the self-timer to either one of two starting times.
1.
Align the power/function switch with
2.
Press to select the self-
timer time you want.
Self timer
Time
BASIC IMAGE RECORDING
Self-timer Time Settings:
Each press of
timer settings described below.
.
Turn the self-timer off
Record 10 seconds after the
shutter release button is pressed
Record two seconds after the
shutter release button is pressed
3.
Press the shutter release button to start the
self-timer countdown.
• The AF assist light/self-timer lamp flashes as the sec-
onds are counted down. If you have the monitor
screen turned on, the seconds are counted down on
the screen.
• To stop a countdown part way through, press the shut-
ter release button.
NOTES
• The hand-shake limiter is enabled when you use a
slow shutter speed and the two-second self-timer at
the same time.
• You cannot use the self-timer in combination with the
Continuous Shutter Mode.
E-52
cycles through the available self-
To do this: Select this setting:
No display
10SEC
2SEC