Status:questionable:enable; Status:questionable[:Event] - Agilent Technologies E2290A User's Manual And Programming Manual

STATus:QUEStionable:ENABle?

Note
Parameters
Comments

STATus:QUEStionable[:EVENt]?

Note
Parameters
Comments
44 SCPI Command Reference
Returns the value of the QUEStionable Status Enable Register as a signed 16 bit
integer.
The Questionable Status Condition, Event, and Enable registers exist for SCPI
compliance only. No status bits are defined or reported in these registers.
None
•
No bits are defined.
Returns the value of the QUEStionable Status Event Register as a signed 16 bit
integer and then clears the register to 0.
The Questionable Status Condition, Event, and Enable registers exist for SCPI
compliance only. No status bits are defined or reported in these registers.
None
•
No bits are defined.
•
This is a destructive read so that all register bits are cleared after the read is
executed.
•
*RST does not affect the contents of the Status Questionable Event Register.
•
*CLS clears the contents of the Status Questionable Event Register.
•
STAT:PRESet does not affect the contents of the Status Questionable Event
Register but does disable reporting the summary of this register in the Status
Byte register (STB?)