Magnavox MDV410 Owner's Manual page 10

MDV410/430 2/7/02 11:18 AM Page 10
10 Hookups (cont'd)
TV has AUDIO (red and white) and S-VIDEO IN jacks
LEFT AUDIO IN
RIGHT AUDIO IN
S-VIDEO IN
Back of TV
(example only)
Connect the supplied red and white audio cables to the red and white
1
AUDIO OUT jacks on the DVD Player and to the red and white
AUDIO IN jacks on the TV, matching the cable colors to the jack
colors.
2 Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack
on the DVD Player and to the S-VIDEO IN jack on the TV.
3 Connect the TV's power cord to a power outlet.
Turn on the TV and set it to the S-VIDEO IN channel. This channel may
be near channel 00. See your TV owner's manual for details.
4 Connect the DVD Player's power cord to a power outlet.
Press the POWER y y button to turn on the DVD Player.
You should see the DVD logo on the TV screen. If you do not, check your con-
nections and make sure the TV is on the correct S-Video In channel.
Connecting the DVD Player to a TV only
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
COAXIAL
1
1
L/MONO
AUDIO
R
VIDEO
in
Y Cr COMPONENT
VIDEO OUT
R L
S-VIDEO
AUDIO OUT VIDEO Cb
OUT
OUT
2