Option 4: Using An Accessory Rf Modulator - Philips DVP5990 User Manual

TV
Option 4: Using an accessory
RF modulator
Use this connection if your TV has only a
single Antenna input jack (labeled as
75 ohm or RF In).
A
Connect the audio/video cables (supplied)
from the TV OUT and AUDIO OUT
L/R jacks on this unit to the video input
jack (yellow) and audio input jacks (red/
white) on the RF modulator.
B
Connect a RF coaxial cable (not supplied)
from the ANTENNA OUT or TO TV
jack on the RF modulator to the antenna
input jack on your TV.
C
Connect the Antenna or Cable TV
service signal (not supplied) to the
antenna or RF input jack on the RF
modulator (not supplied). (It may have
been connected to your TV previously.
Disconnect it from the TV.)
dvp5990_5992_37_Eng1.indd 15 dvp5990_5992_37_Eng1.indd 15
Basic Connections
Antenna
Back of RF Modulator
(example only)
1
Helpful Hint:
– See your electronics retailer for details
about RF modulator availability and
operations.
(continued)
15
2008-03-10 10:47:22 AM 2008-03-10 10:47:22 AM