1 - Connecting the Device
ENH500-AX
a. Remove the rear bottom panel.
b. Connect one end of the Ethernet Cable to the LAN(PoE) port
of the AP/Bridge and the other end to the PoE Port on the
PoE Adapter.
c. Connect the Power Cord with the PoE Adapter and plug the
other end into an electrical outlet.
d. Connect the second Ethernet Cable to the LAN port of the
PoE Adapter and the other end to the Ethernet Port on the
computer.
e. Place the panel removed from step A back into the device.
• Note: The device should ONLY be powered via Ethernet Cable
connected to the included PoE Adapter.
d)
a)
b)
c)
e)
Outdoor Access Point