Haier L42H8 Service Manual page 9

Hide thumbs Also See for L42H8:
Table of Contents

Advertisement

Note:
1. The pin no 9 is an option pin for DISM or LG format. (LG Format="GND" or "OPEN"/DISM
Format="VCC")
2. The pin no 10 is an option pin for DCR Function (Enable="VCC"/Disable="GND")
3. The pin no 30 is LCD Test option.
"AGP" (Auto Generation LCM operates Pattern) or "NSB"( No Signal Black) is case that LVDS
signals are out of frequency or abnormal condition in spite of 12 volt power supply.
LPL recommends "NSB". (AGP: "VCC" or "OPEN"/NSB:"GND")
4. All GND Pin should be connected together, which should be also connected to the LCD
module's metal frame.
5. All Vlcd (power input) pins should be connected together.
6. Input Levels of LVDS signals are based on the IEA 664 Standard.
INVERTOR CONNECTOR PIN CONFIGULATION
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mst6e89

Table of Contents