Table of Contents
Advertisement
fig. 111
To refit the cover, insert the reel ends in
their housings and make sure the fasten-
ing hooks are well fastened. Now extend
the cover by pulling its handles, as previ-
ously described, and hook the two rear
pins B-fig. 111.
IMPORTANT Do not put heavy objects on
the cover which may seriously damage it.
WARNING
The objects put on the cov-
er may be thrown forwards
and injure passengers should you
brake sharply or in the event of an ac-
cident.
F0C0352m
fig. 112
TO RETURN THE REAR SEAT
BACK TO ITS ORIGINAL
POSITION
Move the seat belt sideways and check
that the belt is not twisted.
Versions with rear fixed seat
Lift the seat backs and push them back-
ward until both coupling mechanisms click
in place, check that the "red band" B-
fig. 112 at the side of levers A is no
longer visible.
The "red band" B indicates missing seat
back coupling.
Reposition the cushions in horizontal po-
sition keeping the centre seat belt tongue
raised.
WARNING
Make sure the seat back is
correctly hooked on both
sides ("red bands" B-fig. 112 not vis-
F0C0378m
ible) to prevent seat back being
thrown forwards and injuring pas-
sengers should you brake sharply.
89
Advertisement
Chapters
Table of Contents
