Fiat Stilo 2006 Owner's Handbook Manual page 28

Speed limit (Speed Beep)
With this function it is possible to set the
car speed limit (km/h or mph); when this
limit is exceeded the driver is immediate-
ly alerted (see section "Warning lights and
messages").
To set the speed limit, proceed as follows:
– briefly press button MODE, the display
will show wording (Speed Beep);
Õ Ô
– press button or to select activa-
tion (On) or deactivation (Off) of the
speed limit;
– if selecting (On), press button
to select the required speed limit and then
press MODE to confirm.
Note The possible setting is between 30
and 250 km/h, or between 20 and 155
mph depending on the unit set previous-
ly (see paragraph "Distance unit (Dis-
tances)" described later. Every press on
Õ Ô
button / increases/decreases by 5
Õ
units. Keeping the button /
obtains the automatic fast increase or de-
crease. When you are near the required
setting complete adjustment by single
presses.
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
To abort the setting, proceed as follows:
– briefly press button MODE: (On) will
flash on the display;
– press button
display;
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
Õ Ô
or
Ô
pressed
Automatic headlight sensor
sensitivity adjustment
(Headl. sensor) (where provided)
With this function it is possible to adjust
Ô
: (Off) will flash on the
the light sensor sensitivity according to 3
levels (level 1 = min. level, level 2 = av-
erage level, level 3 = max. level); the high-
er the sensitivity is, the lower is the ex-
ternal light intensity required to switch on
the lights.
This operation can be performed also with
the car moving.
To set the light level required, proceed as
follows:
– briefly press button MODE, the previ-
ously set level will flash on the display;
– press button
quired level;
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
Õ Ô
or to select the re-
27