Canon Inner Finisher-J1 Service Manual page 67

10. Rotate the machine [1] as shown below, and remove
the 2 Screws [2] of the Front/Rear Return Belt Guide.
2x
[2]
11. Return the machine to its original position.
12. Remove the Center Return Belt Guide [1].
• 2 Bosses [2]
[2]
13. Remove the Rear Return Belt Guide [1].
• 1 Boss [2]
[1]
[2]
[1]
[2]
[2]
14. Remove the Front Plate [1].
• 2 Screws [2]
2x
15. Remove the Rear Plate [1].
• 2 Screws [2]
2x
16. Remove the Proccessing Tray Unit [1].
• 1 Screw [2]
61
4. Disassembly/Assembly
[1]
[1]
[2]
[1]
[2]