Keys That Begin With The Letter A - HP 8924C Reference Manual

Keys That Begin with the Letter A

ADRS
ANS
Press and release the SHIFT key, then the LOCAL key to display the HP-IB
address of the Test Set. There is no equivalent HP-IB command for the ADRS key
Programming ADRS
The Test Set's HP-IB address can be changed through HP-IB by using the
:CONFigure:BADDress commands. If the Test Set's HP-IB address is changed
programmatically, all future HP-IB commands must use the new address.
Example
OUTPUT 714;"CONF:BADD 15"
This sets the Test Set's HP-IB address to 15.
The Test Set's HP-IB address can be queried through HP-IB by using the
:CONFigure:BADDress? commands.
Example
OUTPUT 714;"CONF:BADD?"
ENTER 714;Address
This queries the Test Set's HP-IB address.
See Also
"I/O Configure Screen" on page 122
This key functions only when
Pressing this key answers CDMA-mode mobile-station-originated calls by
removing the ring back tone from the mobile station's audio path and allowing
user conversation or other traffic to be exchanged.
The Test Set will automatically answer calls if
HP-IB Example
"DISP CCNT;CDMA:CALL:ANSW"
S:\hp8924c\REFGUIDE\MANUAL\keys.chp
Keys That Begin with the Letter A
is set to
Answer Mode
Answer Mode
Chapter 1, Description of Keys
.
Manual
is set to .
Auto
23