3. Disassembly and Reassemble
Description & Screws
3
Use Open Jig to release tape in corners and
all clips as indicated in red on sides and top &
bottom.
Gently lift up the Rear Cover starting at the
top being careful of function assembly at the
bottom.
•
When the 4 points (
Although the hook is broken, the appearance
of the Rear cover is no problem and Gap
problem is not appeard after re-assembly.
•
To prevent the Inner Hook's broken.
1. Catch the upper section of the rear cover.
2. Open the rear cover from top to bottom.
•
If the wire is bent, need to change the wire.
Open Jigs
BN81-12884A
Locking tabs locations
•
49"
•
55"
3-2
)Hook is broken.
BN81-14946A
Picture Description
Jig Direction
<Bottom Conner>
Top Corner
: 2 point (Snap Hook)
Top
: 10 point Locking
Side AV
: 1 Point Locking
Bottom
: 8 point Locking
Top Corner
: 2 point (Snap Hook)
Top
: 10 point Locking
Side AV
: 1 Point Locking
Bottom
: 8 point Locking