Table of Contents
Advertisement
NOTE
• A newly installed filter may cause the water dispenser to spurt water briefly. This is
because air has entered the waterline.
• The replacement process may cause the water dispenser to drip for a short period of
time. If it drips, simply wipe up any water on the floor with a dry towel.
Untitled-1 59
3. Turn the knob of the filter cartridge
counter clockwise 90 degrees (
The filter cartridge unlocks.
4. Pull out to remove the cartridge.
- If the water filter is severely
contaminated, the cartridge may not
be easy to remove. If that is the case,
use force to remove the cartridge.
- To prevent water leaks from the filter
opening, pull the cartridge straight
out while removing it.
5. Insert a new filter cartridge. Use only
Samsung-provided or approved filters.
6. Turn the cartridge knob clockwise to
lock into place.
7. Close the filter cartridge cover.
8. On the Home screen, tap Fridge
Manager > Fridge Settings > Water
Filter, and then select Reset.
9. When you are done replacing the filter,
open the water valve and run water
through the dispenser for about 7
minutes. This is to remove impurities
and air from the water line.
/
turn).
1
4
English
59
2022-01-20
10:51:50
Advertisement
Table of Contents
