Table of Contents
Advertisement
Before washing for the first time
"Welcome to your ASKO. First time setup." is shown on the display. It is important that you choose
the right settings to ensure good dishwashing results.
Select setting with
Settings
1.
Language
2.
Set level of rinse aid
0/1/2/3/4/5
Default: 4
3.
Set water hardness
0/1/2/3/4/5/6/7/8/9
Default: 0
4.
TAB On/Off
Default: Off
To change the chosen setting, see the chapter Settings.
8
. Confirm selected setting with
Select the language to be shown on the display.
Use rinse aid to improve wash and dry times. Also use rinse
aid to achieve clear and spotless results.
The rinse aid dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
Adjusting the water softener. Select a setting depending on
the hardness of the water supply. It is important that this
setting is correct.
For a water supply with a hardness below 6°dH (10°fH /
7°eH / 1.0 mmol/l / 6.0 gr/gal), select 0. The water softener
is deactivated and no salt needs to be added.
Activate this setting when using an all-in-one detergent that
contains rinse aid.
This setting reduces the rinse aid dosage and affects how
often the dishwasher's built-in softener is regenerated.
.
Advertisement
Table of Contents
