Table of Contents
Advertisement
Problem
Cannot close door.
The dishwasher does not start.
Possible causes
The baskets are not correctly
positioned.
The door lock does not click into
place and lock.
has not been pressed.
The door is not closed properly
or was not closed immediately
after you pressed
You have opened the
dishwasher to add more dishes
while a program is in progress.
The door lock has not clicked
into place and locked.
Check whether the Delayed start
option has been selected.
The plug is not plugged into the
power outlet.
A fuse/circuit breaker has been
tripped.
Troubleshooting
Action
Check that the baskets are
correctly positioned horizontally.
Check that the dishes are not
blocking the baskets from
sliding properly into place.
Check the door lock. If it does
not click into place and lock,
open the door.
Press and hold
until the display starts flashing.
Wait until it stops flashing (60
seconds). Close the door.
Check that the door lock clicks
into place and locks.
Press
shows "Program started, close
door in 4 sec".
Close the door within four
seconds, otherwise the
dishwasher will not start.
.
If you want the dishwashing
program to continue, press
and close the door within four
seconds.
Check the door lock. If it has not
clicked into place and locked,
open the door.
Press and hold
until the display starts flashing.
Wait until it stops flashing (60
seconds). Close the door.
Check that the door lock clicks
into place and locks and that the
dishwasher starts.
Press and hold
seconds if you want to cancel
the Delayed start option.
Check.
Check.
and
until the display
and
for three
33
Advertisement
Table of Contents
