Table of Contents
Advertisement
Chapter 2 Configuration
Chapter 2 Configuration
Configure and manage your LinkStation using the Settings interface, accessible from a browser window. Open
the interface using the appropriate procedure below or type the LinkStation's IP address into the URL field of your
browser. Within Settings, the Easy Admin page gives you quick access to commonly-used settings.
Opening Settings from a Computer
Notes:
• To access Settings, we recommend using NAS Navigator2, which should already be installed on your computer
if you followed the quick setup guide included with your LinkStation for initial setup. If you do not have NAS
Navigator2 installed, refer to the
and install it.
• Internet Explorer 9, Microsoft Edge, Firefox 18, Google Chrome 24, Safari 5, and later are supported. If you have
difficulty viewing Settings, check whether you have a proxy server enabled in the browser settings. If you do,
disable the proxy server.
Opening Easy Admin
The Easy Admin page makes it easy to change common settings. Follow the procedure below to open Easy Admin.
1
Double-click the NAS Navigator2 icon (
2
Right-click your LinkStation's icon and select [Open Settings]. For macOS, select the LinkStation's icon while
holding down the control key, then select [Open Settings].
"NAS Navigator2"
section in chapter 10 for the procedure on how to download
) to start NAS Navigator2.
13
Advertisement
Table of Contents
