Table of Contents
Advertisement
As well as the on-screen software keyboard, this device is equipped with a hardware QWERTY keypad.
Here are tips for using the QWERTY keypad:
The "Fn" key is used to access the symbols in blue and numbers on the keypad. You can choose either of the
three methods to input symbols/numbers:
(1) Press the "Fn" key once (
(2) Press the "Fn" key twice (
(3) Hold down the "Fn" key and press another key at the same time to enter its corresponding symbol.
To de-activate
(1) Press this key once (
(2) Press this key twice (
(3) Hold down this key and press another key at the same time to enter capital letters constantly.
In
mode, press this key again to enter lower case letters.
You can input symbols and accented letters by using this key. After pressing a character, press the "Sym" key
repeatedly, you can see all accent types of this character being displayed in sequence cyclically. Stop pressing
the "Sym" key while the desired character shows. Please refer to the table in the next page for corresponding
symbols and accented letters for each character.
Press this key to erase the letter to the immediate left side of the cursor. Press the "Fn" key once and then press
this key to delete the first letter to the right side of the cursor.
Hardware Keypad
), the next character you enter will be a symbol or number.
), all key-presses will input numbers and symbols.
mode, press the "Fn" key once while in
), the first letter you enter will be capitalized.
), all letters you enter will be capitalized.
mode.
Advertisement
Table of Contents
