Table of Contents
Advertisement
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible solutions.
Consult Blaupunkt authorized dealer if problem persist.
Problems
Possible Causes
Unable to start
The car key is not inserted into the
up
ignition; ignition is o .
Power Cable is not inserted into the
main body.
Burnt power fuse .
Drained car battery.
No sound
Audio cables are not properly
connected to the unit.
Mute setting is on.
Low volume.
No sound from front, rear, left &
right speakers due to Fade-Balance
settings.
No rear-view
The rear camera is not appropriately
reverse
connected with power supply.
image
Camera's signal line not plugged in.
Unable to
Radio's antenna is not well inserted.
search
Unable
Bluetooth is not turned on.
connect to
wireless AA/CP
Unable
When connected wireless AA/CP
connect to
turn to wired AA/CP, mobile phone's
wired AA/CP
WiFi is enable, your paired device is
in the wireless device list (Michigan
City 800 W).
Solutions
Insert the car key and turn on the ignition.
Insert the power cable.
Replace it with a new fuse.
Charge or replace the car battery.
Ensure proper connection of the audio
cables.
Unmute the volume.
Adjust the volume.
Select Equalizer from Home Page to adjust
setting.
Examine the camera's power supply
connectivity.
Insert the camera's signal line into the
interface port of this unit.
Ensure radio antenna is properly installed.
Ensure Bluetooth is turned on, then press
on AA/ CP icon to connect.
When connected wireless AA/CP
turn to wired AA/CP, ensure the mobile
phone's WiFi is turned o & remove the
paired wireless device from the wireless
device list (Michigan City 800 W), then
connect the USB data cable.
12
Advertisement
Table of Contents
