Communication Error Warning; Wake Mode/Cruise Assist; Switch; Operating The Boat With A Minimal Wake (No-Wake Mode) - Yamaha 210FSH SPORT 2022 Operator's Manual

Table of Contents

Advertisement

Communication error warning

If a generic error is detected, a warning will
appear on the multi-function display and the
buzzer will sound. If this occurs, reduce the
engine speed, return to shore, and have a
Yamaha Boat Dealer check the boat.
No-wake mode/cruise assist switch
This switch activates and sets the no-wake
mode, cruise assist, and reverse RPM con-
trol.
1 No-wake mode/cruise assist switch
To operate the no-wake mode and cruise as-
sist, see the following sections. To activate
the reverse RPM control, see "Reverse RPM
control" on page 49.
Operating the boat with a minimal
wake (no-wake mode)
The no-wake mode is useful for operating the
boat at a steady speed with a minimal wake.
This is especially convenient when traveling
in harbors, channels, or other areas posted
with low speed limits as "no wake zones".
The no-wake mode can be activated only
when the engines are operating at idle speed.
To activate the no-wake mode:
(1) Put the remote control levers in the TDE
position or forward position so that both
engines are operating at idle speed.
Instrument operation
(2) Push the plus side of the no-wake
mode/cruise assist switch. Once "No
Wake Mode" is displayed in the multi-
function meter, the no-wake mode is ac-
tivated.
10:27
FUEL
100
%
12.3V
TIP:
JET
WASH
The no-wake mode can be set to 3 engine
1
speeds. To adjust the engine speed while the
no-wake mode is activated, push the plus
side
mode/cruise assist switch.
To deactivate the no-wake mode:
Perform one of the following operations.
Push the minus side of the no-wake
mode/cruise assist switch until "No Wake
Mode" disappears.
Push the remote control levers forward to
open the throttle.
Operating the boat at a steady speed
(cruise assist)
The cruise assist feature is for steady engine
speed operation when the boat is traveling
above no-wake speeds. The cruise assist is
available for use whenever the engines are
running above 4000 rpm and below 7000
rpm.
To activate the cruise assist:
(1) Push the remote control levers forward
to open the throttle until the desired en-
am
0
No Wake Mode
0.3 Avg MPG
or
minus
side
WATER
67°F
MPH
12.3V
of
the
no-wake
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

210fsh deluxe 2022

Table of Contents