Test Run And Test Print - Hitachi SL1 Maintenance Manual

3.3.4 Test Run & Test Print
(1). Power-On & Off
( i ). Power-On:
There is
printer.
Prior to connecting a power
cable, confirm that the push
button top of power supply
switch located at the lower
1
left front of printer projects
from the cover surface.
This means that the printer is in
the power-off status.
Connect a connector of power
2
supply cable to the printer.
Insert a plug of the power
3
supply cable to the inlet.
Pressing the scroll keys (left &
right) and Free Size key, push
the push button top of power
supply switch. Next, press the
ONLINE key. Then, the display
4
of operator panel turns to be the
status of (a), and "MESSAGE"
LED lamp starts to blink.
This blinking means
that the printer is in the
warming-up process.
"MESSAGE" LED lamp
changes to be lit within 210
seconds at max., when screen
5
(b) appears on the operator
panel display.
mark on the power supply switch located on the side panel of the
represents the power supply switch with push-on/push-off function.
Power Supply Switch
(a). Indication at Warming-UP
01
U:LT
MESSAGE ONLINE
FREE SIZE
SELECT
(a). Indication at Warming-UP
00 READY
U:LT
3-8
WAIT /UPP
L:[ ] [
MEDIA
CLEAR
/UPP