Setting The Instant Review - Pentax Optio WS80 Operating Manual

4
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
M
f
When [Pixel Track SR] is set to O, camera shake is corrected after
shooting, and then the corrected image is saved.
3
The Pixel Track SR function does not work in the following situations:
- When C (Movie), V (Underwater Movie), X (Digital Wide),
- When g (Self-timer), j (Continuous Shooting) or K (Burst
- When the flash discharges
- When the sensitivity is set to 1600 or higher
- During Voice Recording

Setting the Instant Review

Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant Review].
3
Use the four-way controller (45)
to select O or P.
O
P
120
When [Pixel Track SR] is set to O
When the shutter release button is pressed halfway with [Pixel Track
SR] set to P, and the shutter speed is slow or the flash mode is set to
a (Flash Off) (Camera shake warning).
C (Half-length Portrait), S (Fireworks), F (Digital Panorama) or
N (Frame Composite) mode is selected as the shooting mode
Shooting) is selected as the drive mode
Instant Review is displayed.
Instant Review is not displayed.
Rec. Mode 3/4
Instant Review
Memory
Green Button
Sharpness
Saturation
Contrast
Exit
MENU