Setting Pixel Track Sr - Pentax Optio WS80 Operating Manual

3
Use the four-way controller (45)
to select O or P.
Blink Detection function works.
O
Blink Detection function does not
P
work.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
Blink Detection 1p.73

Setting Pixel Track SR

You can set this function to correct camera shake which occurs during
shooting. If you set Pixel Track SR, the camera automatically corrects
any camera shake in the images you shot. The default setting is P (Off).
Use the Movie SR function (p.129) to correct camera shake in C
(Movie) and V (Underwater Movie) modes.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track
SR].
3
Use the four-way controller (45)
to select O or P.
Corrects camera shake.
O
Does not correct camera shake.
P
Rec. Mode 2/4
EV Compensation 0.0
Movie
D-Range Setting
Interval Shoot
Blink Detection
Digital Zoom
Exit
MENU
Rec. Mode 1/4
Pixel Track SR
Recorded Pixels 10
M
AWB
White Balance
Focusing Area
AE Metering
Sensitivity Auto
Exit
MENU
3
119