Recorded Pixels - Pentax Optio P80 Operating Manual

3
Turn the camera clockwise and
hold it in the vertical position.
In O mode, everything is displayed
vertically on the display.
When the camera recognizes a person's
face, the Face Recognition function is
activated and the face recognition frame
appears (p.72).
4
Press the 3 button to change the number of

recorded pixels.

The number of recorded pixels is changed as follows each time the
3 button is pressed: E → f → m → E.
5
Press the Green button to change the flash mode.
The flash mode is switched between , (Auto) and a (Flash Off) each
time the Green button is pressed.
6
Use the four-way controller
(2345) to adjust the zoom and
exposure.
The directions on the four-way controller are
also realigned when you hold the camera
vertically:
Four-way controller (2/b)
Four-way controller (3/q)
Four-way controller (4/MODE)
Four-way controller (5/g)
7
Press the 4 button.
The picture is taken.
OK
OK MENU
12
Telephoto
Wide-angle
Exposure compensation (–)
Exposure compensation (+)
50 50 50
MENU
12
M
50 50 50
M
81
3