Pentax Optio P80 Operating Manual page 233

Message
Protected
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Display image/sound
from built-in memory
This image cannot be
registered as a Favorite
No images are available
to register as a Favorite
No image
Not enough battery
power remaining to
activate Pixel Mapping
The image or sound file you are trying to delete is protected
(p.152).
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters the built-in memory
display.
The selected image is not suitable for registration as a
Favorite.
There are no images suitable for registration as a Favorite.
There are no playable images in the Favorites.
Appears during pixel mapping if the battery level is
insufficient. Replace the battery with a fully charged one or
use an AC adaptor kit K-AC88 (optional). (p.35)
Description
9
231