Table of Contents
Advertisement
Installing the image processing software (ACDSee for PENTAX)
This section describes the procedures for installing ACDSee for PENTAX
which lets you view and edit recorded images on your computer.
If you are using Windows 2000 or Windows XP, please login as an
administrator user before starting installation. Refer to your PC's
operating manual for instructions on how to login.
1
Turn your computer on.
2
Insert the CD-ROM (S-SW20) into your CD-ROM drive.
The PENTAX Software Installer screen is displayed on the desktop.
• When the PENTAX Software Installer screen is not displayed
Display the PENTAX Software Installer screen following the steps below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM drive (S-SW20)] icon.
3) Double-click [Setup.exe].
3
Click your applicable language.
You can choose the languages from the displayed screen.
A selection screen to install your desired software is displayed.
4
Click [ACDSee™].
The Setup screen will appear.
Follow the on-screen guidance and
enter the registration information.
Reboot your PC after installation is
finished.
• If QuickTime or later is not
already installed in your PC, a
message such as the one shown
on the right is displayed before
the Setup screen appears. Click
[Install QuickTime] to first install
QuickTime.
The panoramic image software "ACD Photostitcher", the image layout
and printing software "FotoSlate", and the image editing software
"FotoCanvas" are also installed when you install ACDSee for PENTAX.
8
Advertisement
Table of Contents
