Table of Contents
Advertisement
4. Basic operation in the Public Mode
Vol (+/-) or Cursor ( / )
CH (
/
) or Cursor ( / )
Decision (ok)
Public Mode setting screen.
Public Mode
POWER ON FIXED
SHUT DOWN MODE
MAXIMUM VOLUME
VOLUME FIXED
VOLUME FIXED LEVEL
RC BUTTON
PANEL BUTTON
MENU BUTTON
AV POSITION FIXED
ON SCREEN DISPLAY
INPUT MODE START
INPUT MODE FIXED
LOUD SPEAKER
RC PATH THROUGH
232C POWON
PUBLIC MODE
RESET
EXECUTE
5. Operation after "RESET"
Select "RESET" in the PUBLIC Mode, and it operates as follows when it is executed (refer to the basic operation).
•
The set contents in the PUBLIC mode are initialized.
•
It does not exit the PUBLIC mode.
•
If "EXCUTE" is not executed, the content that does RESET is not reflected.
6. Setting items (* Item names and selective items are expressed in English.)
1) Power ON fixed [POWER ON FIXED]
Option
Default
Function
Key disabled when set
other than default
Remarks
If the power button is pressed in the ordinary mode in setting to "FIXED_ALL" and "FIXED_BODYKEY", the caution is displayed for 5 seconds.
When power button on the main unit is pressed
No Power off by power button.
* The OSD display is an example.
If another ODS is previously displayed, the status is reset (MENU or similar).
Change or execution of the set value.
Movement to the selected item.
Execution (Used by the items "Execution" and "RESET".)
[VARIABLE]
[NORMAL]
[60]
[VARIABLE]
[20]
[RESPOND]
[RESPOND]
[RESPOND]
[VARIABLE]
[YES]
[NORMAL]
[VARIABLE]
[ON]
[OFF]
[DISABLE]
[ON]
"VARIABLE", "FIXED_ALL", "FIXED_BODYKEY" or "RCRESPOND" (loop enabled)
"VARIABLE"
•
VARIABLE
: "POWER/RECEPTION" key on TV unit or remote control is enabled.
•
FIXED_ALL"
: "POWER/RECEPTION" key on TV unit or remote control is disabled.
•
FIXED_BODYKEY : only the "MAIN POWER" key on TV unit is disabled (the remote control is enabled).
•
RC RESPOND
: the main unit's POWER switch toggles between ON and Standby (the same operation by
the remote control).
•
OFF TIMER (SLEEP) (* Only when setting to FIXED_ALL)
•
When selecting to "FIXED_ALL", function related standby factors (see below) doesn't work. and not selecting
OFF TIMER (Sleep)
No operation OFF
No signal OFF (including the power management)
* These items does not exist according to the model.
When power button on R/C is pressed
No Power off by remote control.
6 – 11
LC-46/60LE925E
Advertisement
Table of Contents
