Table of Contents
Advertisement
1
Place the container onto the
motor housing.
● Make sure the container sits properly
on the motor housing.
3
Swing the clamps (both sides) by
using both hands to secure the
container cover until a "click"
sound is heard.
● If the clamps are not engaged
correctly, the motor will not operate.
5
Insert the power plug into the
outlet completely. Rotate the
switch knob to the proper speed
position.
7
After use, turn the switch knob to "0" position and unplug.
● Remove the juice cup .
● Before release the clamps(both sides), make sure the spinner
stops rotation completely.
● Depending on different ingredient type and amount, some
ingredients residue may remain in the container cover.
JZ50H168_MJ-CS100HK_20221005.indb 7
JZ50H168_MJ-CS100HK_20221005.indb 7
How to Use
2
①
Place the spinner in the container
and fix it into position.
②
Place the container cover onto the
container.
4
Attach the juice cup to
the motor housing.
● Set the juice cup properly,
otherwise juice may flow-
out from the juice cup.
6
Place the ingredients one by
one into the feeding tube,
then press the feeding pusher
slowly.
● Place the juice cup properly,
otherwise, the juice may leak out of
it. When pulp container/juice cup is
filled with pulp/juice, pour them out.
Rotate the switch knob to position
"0" before disassembling the
container and juice cup.
● Depending on the ingredients type
and amount, pieces of ingredients,
seeds, and juice may spray out of
the feeding tube.
600
600
600
600
600
600
EN7
2023-01-05 19:37:58
2023-01-05 19:37:58
Advertisement
Chapters
Table of Contents
