Pentax K10D Operating Manual page 224

222
Exposure Mode
Shutter
Lens Mount
Lens Used
Autofocus System
Viewfinder
5
Viewfinder Indication
LCD Panel Display
Preview Function
Continuous Shooting Approx. 3 fps, JPEG: until SD Memory Card is full RAW: up to 9 frames
Self-timer
Remote Control
Mirror
Exposure Bracket
Extended Bracket
A, Green, e Hyper-program, K Sensitivity priority,
b Shutter priority, c Aperture priority, L Shutter & Aperture
priority , a Hyper-manual, p Bulb, M Flash X-sync speed
Electronically controlled vertical-run focal-plane shutter, Speed
range (1) Auto 1/4000 to 30 sec. (stepless), (2) Manual 1/4000
to 30 sec. [1/2 EV step or 1/3 EV step] (3) Bulb, Electromagnetic
release, Shutter lock by setting Main switch in OFF position.
Pentax K bayonet mount (AF coupler, lens information
AF2
contacts, K-mount with power contacts)
Pentax K mount lenses, K
AF2
TTL phase-matching autofocus system (SAFOX VIII), AF
operational brightness range: EV -1 to 18 (at ISO 100 with f/1.4
lens), Focus lock available, Focus Mode: l (Single)/k
(Continuous)/\, Adjustable AF point
Pentaprism Finder, Interchangeable Natural-Bright-Matte II
focusing screen, Field of view: 95%, Magnification 0.95× (with
∞
50 mm f/1.4 lens at
Focus information: ] is lit when in-focus and blinking when unable to
focus, b is lit = Built-in flash ready, b is blinking = Flash should be used
or incompatible lens is being used, Shutter speed, Confirm Sensitivity,
Aperture value, e-dial enabled indicator, @ = AE lock, Capacity
remaining, m = EV compensation, N = Flash compensation, \ =
Manual focus, o = ISO warning, Shake Reduction display, EV bar
b is lit = Built-in flash ready, b is blinking = Flash should be used
or incompatible lens is being used, 3 = Auto discharge,
> = Redeye reduct, Q = Slow-speed sync, 9=Single frame
shooting, j = Continuous shooting, g = Self-timer, h= Remote
control shooting, ? = Battery exhaustion warning, ] = Auto
bracket exposure (EV steps can be set to 1/2 EV or
1/3 EV), N = Flash compensation, ISO warning, Shutter speed,
Aperture value, White Balance, Capacity remaining and m = EV
compensation, PC (mass storage)/Pb (PictBridge) appears when
the USB cable is connected, EV bar, 1, 1P
Optical Preview: Depth of field confirmation (electronically
controlled and usable in all exposure modes)
Digital Preview: Composition, exposure, focus and white
balance confirmation
Electronically controlled with delay time of 12 sec./2 sec. (with mirror
up function). Start by pressing shutter release button. Operation
confirmation: Possible to set beep. Can be cancelled after operation
Pentax Remote Control F (optional) Release shutter immediately
or three seconds after pressing the remote control shutter button.
Quick-return mirror, mirror up function (2 sec. self-timer)
Three or five frames (underexposed, proper exposure and
overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/2 EV and 1/3 EV for EV steps)
Three frames are saved continuously with white balance,
saturation, sharpness and contrast bracketing.
mount lenses, K
AF
-1
), Diopter: –2.5m to +1.5m
mount lenses
A
-1
(per meter)