Pentax DigiBino DB100 Operating Manual page 21

¢
Press or
and then press
∞
Repeat Step 4 to change the [day] [hour] and
[minutes].
§
When you have finished the settings, press the OK button when the
clock reaches 00 seconds.
The screen confirming the settings will be displayed and the DIGIBINO is ready to
take a picture.
Memo
• If the MENU button is pressed, the setting is canceled but shooting is enabled. In this case,
the Date Adjust screen appears again when the power is turned on next. You can change the
settings after they have been made. Refer to "Adjusting the Date/Time" (p.46).
• The time display is 24-hour display format.
button to change the month,
button.
Date Adjust
2003 / 2 / 1
00 : 00
OK Ok MENU Exit
Date Adjust
2003 / 2 / 16
11 : 30
OK Ok MENU Exit
19