JVC GR-SXM57 Instructions Manual page 26

26
EN
N O TE:
Before performing the following steps, make
sure that:
● The Power Switch is set to "
● The camcorder is in the Record-Standby
mode.
● The recording mode is set to " SP " .
Recording Start/ Stop Button
D isplay
REC T I ME
O F F
1 / 4 S
1 / 2 S
1 S
5 S
I NT . T I ME
O F F
1 5 S
3 0 S
1 M I N
5 M I N
1 5 S
1 S
N O TES (for Anim a tion a nd Tim e-La pse):
● For best results, make sure the camcorder is secured when shooting in Animation or Time-Lapse mode.
● Fade- or wipe-in/out cannot be performed during Animation or Time-Lapse shooting.
● Before performing other operations following Animation or Time-Lapse recording, make sure the Animation
or Time-Lapse mode is deactivated.
● Animation and Time-Lapse are canceled when the power is shut off or when the cassette is ejected.
Downloaded from:
" .
M EN U W heel
REC TIM E M enu
IN T. TIM E M enu
Interval time
indicator
Recording time
indicator
https://www.usersmanualguide.com/
RECORDING
Animation
You can shoot a series of pictures, each slightly different,
of the same object for a brief period of time.
1
Press M EN U . The Menu Screen appears.
2
Rotate M EN U to select "
press it to display SYSTEM MENU. Rotate M EN U to
select " NEXT " and press it to display the next page.
Then, rotate M EN U to select " REC TIME " and press it.
The REC TIME Menu appears. Rotate M EN U to select
the desired recording time, then press it.
3
The Menu Screen reappears with the highlight bar on
" RETURN " . Press M EN U again to close the Menu
Screen.
4
Press the Recording Start/Stop Button after focusing
on the subject. The recording stops automatically
after the selected period of time.
• Repeat step 4 for the desired number of pictures.
5
To release the Animation mode, set " REC TIME " in
the Menu screen to " OFF " .
Time-Lapse
You can record sequentially at preset time spans. Leaving
the camcorder aimed at a specific subject, you can record
subtle changes over an extended period of time.
1
Set " REC TIME " (
above).
2
Rotate M EN U to select " INT. TIME " and press it. The
INT. TIME Menu appears. Rotate M EN U to select the
desired interval time, then press it. The Menu Screen
reappears with the highlight bar on "
Press M EN U again to close the Menu Screen.
3
Press the Recording Start/Stop Button. Recording and
intervals alternate automatically.
4
To release the Time-Lapse mode, when "
displayed, press the Recording Start/Stop Button to
display "
" INT. TIME " in the Menu Screen to " OFF " .
Advanced Features (cont.)
TO SYSTEM MENU " and
step 1 and 2 of " Animation "
RETURN " .
" , then set " REC TIME " and
" is not