Table of Contents
Advertisement
[UNIFORMITY]
Correct the brightness unevenness and color unevenness of the entire screen.
1)
Press as to select [UNIFORMITY].
2)
Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
[USER CORRECTION]
[PC CORRECTION]
Note
f "Geometric & Setup Management Software" can be downloaded from the following website.
https://panasonic.net/cns/projector/pass/
It is necessary to register and login to PASS to download.
Setting [USER CORRECTION]
Correct the brightness unevenness and color unevenness of the entire screen as desired.
1)
Press as to select [UNIFORMITY].
2)
Press qw to select [USER CORRECTION], and press the <ENTER> button.
f The [UNIFORMITY:USER CORRECTION] screen is displayed.
3)
Press as to select [ADJUSTMENT LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[1] - [5]
f If you press w while the adjustment value is [5], the value will become [1]. If you press q while the
adjustment value is [1], the value will become [5].
5)
Press as to select [TEST PATTERN].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
7)
Press asqw to select [UPPER LEFT], [UPPER RIGHT], [LOWER LEFT], [LOWER RIGHT], [UPPER],
[LOWER], [LEFT], [RIGHT] or [ALL].
8)
Press the <ENTER> button.
f The adjustment screen of [RED], [GREEN], or [BLUE] for the item selected in Step 7) is displayed.
9)
Press as to select [RED], [GREEN], or [BLUE].
10) Press qw to adjust the level.
Item
[RED]
[GREEN]
[BLUE]
120 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Does not correct the brightness unevenness and color unevenness of the entire screen.
Corrects the brightness unevenness and color unevenness of the entire screen as desired.
For details, refer to "Setting [USER CORRECTION]" (x page 120).
Corrects the brightness and color unevenness of the entire screen using a computer and "Geometric
& Setup Management Software".
Select the signal level (target brightness to adjust).
The entire screen becomes darker when the value gets larger.
Displays the test pattern.
Does not display the test pattern.
Operation
Press w.
Press q.
Press w.
Press q.
Press w.
Press q.
Adjustment
Red becomes darker.
Red becomes lighter.
Green becomes darker.
Green becomes lighter.
Blue becomes darker.
Blue becomes lighter.
[ADJUSTMENT LEVEL]:
Range of adjustment
[1] - [4]: -127 - +127
[5]: 0 - +127
(Factory default setting: 0)
Advertisement
Table of Contents
