Table of Contents
Advertisement
b
e
n
b Pull the four sides of the fabric to stretch it tight.
Make sure that the fabric is stretched tightly in the
hoop.
Turn the outer hoop levers in the direction of arrow.
t
Remove the template.
e
n Clamp the fabric to the hoop with the clamps.
i
* After sewing, pull the clamp in the direction of arrow to
remove them. Turn the outer hoop levers and remove
the fabric.
NOTE:
• Thick layers of fabric and stabilizer may cause
skipped stitches, or broken threads and needles.
Avoid sewing on the layers thicker than 3 mm (1/8˝).
• Make sure that the anti-slipping sticker is attached
on the embroidery hoop RE36b (refer to 6 page).
21
e Outer hoop lever
t Template
i Clamp
Advertisement
Table of Contents
