HoMedics SHIATSU+ KNEADING & VIBRATION CUSHION Instruction Manual And Warranty Information page 7

MASSAGE ZONES
Zone buttons cause the moving
massage mechanism to target
specific areas of the back. To
select a massage area, press the
button and the corresponding
LED light will illuminate. To
deselect, press the button again
and the corresponding LED light
will turn off.
FULL BACK
The massage mechanism
travels up and down the back.
UPPER BACK
The massage mechanism focuses
from the mid to upper back.
HEAT
For soothing heat when
massage is on, press the
heat h button and the
corresponding LED light
will illuminate. To deselect,
press the button again and
the corresponding LED light
will turn off. For your safety,
heat cannot be turned on if
massage is not selected.
CAUTION: All servicing of this massager must be performed by authorized HoMedics service
personnel only.
POWER
To turn on the massage
functions, first press the
power p button. The LED
indicator will illuminate when
the massage cushion is on. To
turn off the massage functions,
press the button again. The LED
indicator will blink while the
massage mechanism returns to
its lowest point, and then it will
turn off.
VIBRATION
To turn on vibration, press
the vibration v button once
for low intensity, again for
medium intensity, and a third
time for high intensity. The
corresponding LED light will
illuminate. To turn off vibration,
press vibration v for a fourth
time.
LOWER BACK
The mechanism focuses from
the mid to lower back.
7