HoMedics SHIATSU+ KNEADING & VIBRATION CUSHION Instruction Manual And Warranty Information page 4

INSTRUCTIONS FOR USE
CAUTION: To avoid pinching, DO NOT lean on the back massage mechanism in the cushion
when adjusting your body position. DO NOT jam or force any part of your body in the moving
massage mechanism.
The unit comes with a screw located on the back of the unit to protect the massage mechanism
during shipment, which must be removed before the first use to allow the massage feature to
function. Use the provided Allen wrench. Then, properly dispose of the screw. WARNING: Failure to
remove screw may cause permanent damage to the massage cushion.
To reduce the risk of electric shock, this unit is equipped with a polarized plug (one blade wider
than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. DO NOT change the plug in any way.
NOTE: For your safety, this unit is equipped with a 15-minute auto-off feature.
1. Untie cord strap, extend cord, and insert plug into a 120-volt household electrical outlet to power the unit.
2. Attach the cushion to most chairs for a luxurious massage as you read, rest, or even work. See pages 7 for
instructions on the use of the hand control.
STRAPPING SYSTEM
The massage cushion incorporates a unique strapping system that allows you to fasten it to almost any
chair. Just slip the straps over the seat or chair and adjust fastening straps to secure.
4