Option Settings - Sanyo VDC-HD3500P User Manual

These operations may be performed with the Web browser installed on your PC. For details, refer to the linked
information.
Operation
Restoring factory default
settings
Resetting login password (for
default users only)
Adjusting focus
Adjusting iris
Inverting video of wall-mounted
camera
Restarting camera
Viewing Firmware Version
Be sure to stop recording once before attempting to restart the camera or restoring the factory default
settings. Performing these operations during recording prevents correct video recording.
For the detailed procedures for connecting terminals and cables, refer to the "Connections" section.
Use these coupling holes to mount the camera to the separately-sold base bracket.
Use this socket to connect the camera to your PC to enable network operation.
Associated button and use
1
Press the NEAR button (
3
button ( ) simultaneously
2
Press the FAR button ( ) and the SET
3
button ( ) simultaneously
For details, refer to the "Lens Adjustment"
section.
Press the REVERSE button (
5
Press the RESET button (
For details, refer to the "Viewing Firmware
Version" section.
Equivalent network operation screen
) and the SET OPTION SETTINGS (FACTORY
DEFAULT)
Not supported via network operation
CAMERA SETTINGS (FOCUS
ASSIST/IRIS SETTINGS)
4
) Not supported via network operation
For details, see the "Installation
Manual".
) OPTION SETTINGS (CAMERA
REBOOT)
OPTION SETTINGS (FIRMWARE
UPDATE)
Introduction 7/16