Backlight Compensation <Blc - Sanyo VCC-P7575PA Instruction Manual

Backlight Compensation <BLC>
If the images of subjects are not clear because of backlight, correct it by adjusting
conditions or changing correction method.
1
Select "BLC" and specify a correction method.
SYNC
·BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
·BLC
PRESET
MENU
2
Set "MENU" to "END" and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
■ CENT (Center zone metering)
Correction is made based on the optical measurement that is
focused on the central area of the screen (The image of subject to
be corrected is located in the center of the screen).
■ MULT1 (Multi-spot metering, Normal mode)
Correction is made based on the optical measurement and
assessment of the entire screen (The image of subject to be
corrected is not limited to a center of the screen location).
■ MULT2 (Multi-spot metering, High mode)
Compared to MULT1, faster backlight correction is possible
against a lesser amount of light.
■ OFF
No correction is performed for backlight.
For accessing the Main menu, see pages 5 – 7.
14