Advertisement
Quick Links
Advertisement
Related Manuals for Sinclair SCMI-03S
Summary of Contents for Sinclair SCMI-03S
- Page 1 USER'S MANUAL COMMUNICATION MODULE SCMI-03S...
- Page 2 “Translation of original instructions” IMPORTANT NOTE: Read this manual ca r efully befo r e installing or operating your new air conditioning unit. Make sure to save this manual for future reference.
- Page 4 AC units near the receiving diode of the remote control and their wires must be connected to the appropriate terminals of the SCMI-03S module. The green LED of the SCMI-03S module indicates its connection to the mains supply voltage.
- Page 5 Output for transmitting IR diode of channel 2 Connection of the SCMI-03S Module Identification of the SC05010 module wires: Temperature sensor wire – yellow IR transmitter wire – black Ground wire (common) – blue and red Fig. 2 Wiring diagram of the SCMI-03S module - 2 -...
- Page 6 Manual Setting of the SCMI-03S Module After turning on the power and initializing the module, the basic display appears containing the set operation mode, the set reference temperature and the actual reference temperature Coo xx.x°C Ref xx.x°C After pressing the ▲ key, the data for the first AC unit appears xx.xºC...
- Page 7 Setting of fan performance of both AC units Display Setting of the module display Setting the Control Parameters of the SCMI-03S Module The menu for setting the module control parameters has the following items Goal T Setting of the target (desired) temperature in the range of 15–30°C Period Setting of the alternation period of the ACs operation;...
-
Page 8: List Of Errors
Off or a delay from 30 to 120 seconds List of Errors The menu allows you to view up to the last eight operation errors of the SCMI-03S. When one or more errors have occurred and you open this menu, the recorded errors are displayed sequentially (from the latest to the oldest one). - Page 9 Direct logic for activation of the output relay Inverse Inverse logic for activation of the output relay Code Sinclair Sinclair code for IR signal for AC control Nordic Nordic code for IR signal for AC control Louvres AC louvres control is switched on...
-
Page 10: Installation
Installation of the SCMI-03S Module The SCMI-03S module itself can be placed on a DIN rail. In addition to the two SC05010 modules, it is necessary to place a reference temperature sensor in the room according to the installation requirements. For wiring diagram, please see Fig. 2.