Camera Setup; Attaching The Wrist Strap; Inserting The Battery - Sanyo VPC-E1075 Instruction Manual

Camera Setup

Attaching the Wrist Strap

Follow these instructions to attach the wrist strap to your camera
to facilitate easy carrying:
1. Insert the short loop of the strap in the strap eyelet.
2. String the larger loop of the strap through the short loop and
pull tight to attach the strap to the camera.

Inserting the Battery

Follow these instructions to insert one Li-ion battery into the battery compartment.
1. Open the battery com-
partment on the left of
the camera.
2. Insert the battery into the
compartment observing
the correct polarity.
(Label side up)
3. Close the battery
compartment.
Note: The Li-ion battery should be fully charged before using for the first time.
Camera Setup 15
Attaching the Wrist Strap