Sanyo DP32242 Owner's Manual page 23

Caption: Changes the station identifier.
Favorite: Registers channels to the Favorite List
Add: Adds or skips channels
CAPTION FUNCTION:
change caption. Press the OK button.
Select or edit the station identifier. (maximum 8
characters available)
FAVORITE FUNCTION:
button.
Select the number
ADD FUNCTION:
Press OK button to select Yes(add) or No(skip) to set
favorite.
Select the number
Move the cursor to a channel number
OK button to tune to the channel.
Select Apply
To cancel the Edit
1
button.
2
the OK button to return to ANT/Cable setup mode.
Signal meter (Check signal strength)
Check the signal strength if interference is found or
freezing occurs on a digital image.
OK
1
Press MENU button on the remote control and use
the CURSOR
menu. Press the OK button.
2
Use CURSOR
Cable setup menu. Press OK button.
3
Use CURSOR
meter item. Press OK button.
If the signal is weak, check the antenna. If no
problem is found, consult your local dealer.
Note:
Not available if "Cable" is selected in "ANT in".
Available only for digital antenna channels.
OK button.
OK
buttons to select Setup
buttons to select ANT/
buttons to highlight Signal
23