Samsung AM MXVAFC Series Installation Manual page 75

Insulate the distribution header
f Fix the distribution header with a cable tie and cover the connected part . f
f Insulate the distribution header and the welded part and wrap the connected part with an f
adhesive insulation tape to prevent dew formation .
Adhesive insulation tape
Insulate the refrigerant
Insulate the
pipe
distribution
header
f Fix the distribution header with a hanger after insulating it . f
Insulating the branch joint
f Tightly attach the insulator, provided with the branch joint, to the separately purchased insulator . Wrap the connected
f
part with an insulator (separately purchased item) that has thickness of at least 10mm (0 . 3 9 inch) .
f Use an insulator that resist heat up to 120°C . Wrap the branch joint with an insulation that has thickness of at least 10mm f
(0 . 3 9 inch) .
Pipe insulator
Provided
(Separately
Insulator
purchased item)
Fix securely without
any gap .
150mm
Branch
(5 . 9 0 inch)
joint
Thickness of the insulator (Separately purchased item) should be
thicker than 10mm (0 . 3 9 inch) .
Fix securely without any gap .
Pipe insulator
(Separately
purchased item)
Insulate after welding a stopper
Adhesive insulation tape
Insulation tape (Separately purchased item)
Pipe
Pipe insulator (Separately purchased item)
❋ ❋ Attach the adhesive insulation tape to the
pipe, as shown in the picture, after insulating
the pipe .
Insulation
75