Table of Contents
Advertisement
Adjust the sound volume of the speaker.
4
Tap
(Volume) and then adjust the sound volume.
Adjust synchronization between the TV audio and the speaker audio.
5
On "Sony | Music Center," tap [SRS-XV800] - [Settings] - [Sound] - [Adjust synchronization with TV audio], and then
select the optimal delay adjustment time length.
Note
If calibration of synchronization by "Sony | Music Center" does not solve the issue of audio delay between the TV and the
speaker, see
Video and audio are not synchronized; or audio sounds
While the TV Sound Booster function is activated, the 3 speaker components (3 tweeters) on the front side of the speaker are
disabled to optimize the audio output for the combined use with a connected TV.
Making setup of the TV Sound Booster function with "Sony | Music Center" places the speaker automatically into OPTICAL IN
mode.
If OPTICAL IN on the speaker is flashing, the format of the output signals from the device, which is connected to the OPTICAL IN
(optical digital audio input) connector, is not compatible. In such a case, refer to the instruction manual supplied with your device.
Do not use the OPTICAL IN connector in places where the speaker is likely to have water splashed on it. The supplied AC power
cord (mains lead) as well as the jacks and ports (AC IN/USB/AUDIO IN/OPTICAL IN/MIC/GUITAR) behind the cap are not
designed for water resistant.
Hint
Instead of using "Sony | Music Center," you can use the touch panel on the speaker to activate/deactivate the TV Sound Booster
function or adjust the sound volume as well. Touch TV SOUND BOOSTER or –/+ (volume) on the speaker.
When the bass sound seems too strong or weak, adjust the sound volume of the speaker.
When the human voice, such as the singing or speaking voice, seems hard to understand, adjust the TV volume.
duplicated.
49
Advertisement
Table of Contents
